Easypix S328 Manual De Instrucciones página 6

computer as soon as possible or insert an SD memory card for taking more photos!
Flash
Your camera has a flash function enables you to take photos when the light condition is not good.
Press Left button, until the icon
button until the icon
button until you see icon
until the icon display on the LCD, it means the flash function is turned off.
Note: "Low Power" will show on the LCD, if you change flash function when the battery power is
insufficient. Now please reinstall new batteries for flash function.
Digital Zoom function
You can magnify your subject using the digital zoom. Use the T and W buttons to adjust the zoom
up to 4X. Press the T button to zoom in on your subject. Push the W button to zoom back out.
Anti-shake function
Your Digital Camera has a function that prevents photos coming out blurry as a result of trembling
or shaking when taking the photo. Because of this function, you are not required to use a tripod and
take good quality photos. To set as below:
1. Press Menu button.
2. Press Right/Left button to select Anti-shake.
3. Press Shutter button.
4. Use Right/Left button to select:
"Yes" - to activate and turn the anti-shake on. Icon
"No" - to exit or turn the anti-shake off. Icon
5. Press Shutter button to confirm.
Change Image Resolution
The build-in memory allows you to take one 3.1 Mega-Pixel testing photo without SD memory card,
inserted a SD memory card to get more image size selections.
1. Press the Menu button.
2. Press the Right/Left button to select the RESOLUTION option.
3. Press the Shutter button.
4. Press the Right/Left button to select one of the following resolutions :
(5M) 2592x1944 pixels
(3M) 2048x1536 pixels
(2M) 1920x1080 pixels
(VGA) 640x480 pixels
5. Press the Shutter button again to confirm your selection.
Note:
Different image resolutions will affect the photo quality. High resolution photos will be of better
picture quality and therefore will take up more camera memory capacity than lower resolution
photos.
Self Timer
You can include yourself in a photo by using this feature to delay the time between your pressing
the shutter and when the photo is actually taken. It is recommended that you use a tripod when you
use the self-timer.
1. Press Menu button.
2. Press Right/Left button to select MODE.
3. Press Shutter button
4. Press Right/Left button to select SELF.
5. Press Shutter button again to confirm. A
will appear on the LCD, the auto flash is turned on, press Left
will show on the LCD, the red eye reduction function is on. Press Left
appear on the LCD screen the flash is forced on. Press Left button
will show on the screen.
will appear on the screen.
icon will appear on the left corner of the LCD.
6