Lenco DAR-061 Manual Del Usuario página 15

Repeat operation
1. Press the Rep. button on the remote control to choose the Repeat 1 or repeat all etc.
2. Repeat 1 to repeat the current track(song). "
Repeat all to repeat all tracks(full CD). "
Repeat Album (in MP3 disc) to repeat the whole Album. "
Random to shuffle all track and play them in random order. "
Intro to play the first 10 seconds of every track.
PROGRAMMING TRACKS
In CD/MP3 mode, press the
the memory function.
In CD disc: "P01" and 001 will display, press
memory.
Press Prog button on remote control to confirm. Repeat this operation can memorize 99
tracks.
Press the button to start playing the tracks in order programmed. Press the
twice to cancel memorized tracks.
Aux Mode
Selecting Aux in mode
If you are in other mode, press the Power I Mode button to enter the mode icon, this will
be shown in the LCD display. Turn the 'Prev/Next' knob on the unit or press the mode
button on remote control to choose the AUX IN, then press the OK button on the unit to
confirm.
1. Use a standard 3.5 mm stereo connector (not included) to connect the external device
to the"AUX-IN "jack on the back panel of the unit.
2. start playback of the external device
Technical Specifications
Connections
Adaptor Input
Adaptor Output
Output power
Batteries in remote control (not
included)
DAB Frequency
FM Frequency
Bluetooth Frequency:
RF Power
Power consumption (standby)
Power consumption (network standby)
Operating Temperature
Operating position
" will be displayed.
button to stop, press Prog button on remote control to start
or
12VDC IN, 3.5mm AUX-IN, 3.5mm headphone-
out
AC 100-240V ~ 50/60Hz
12VDC/2.5A
2 x 10W RMS
2 x AAA
174.928 - 239.200 MHz
87.5 - 108 MHz
2402 - 2480MHz
<20 dBm
< 1W
< 2W
0°C-35°C
Horizontal
15
" will display.
" will be displayed.
"will be displayed.
to select the trakc you want to
button