Power On/Off - HoMedics OCTS-200 Manual De Instrucciones

7. Attach the seat back onto the armrests so it is properly aligned with
the seat cushion using the included Allen wrench and the remaining
4 screws (2 on each side).
Figure 8
8. Once the armrests are properly aligned with both the seat cushion
and seat back, completely tighten all 8 screws (4 on each side) and
cover with provided screw covers.
8
Massage Cushion and
Hand Control Instructions

Power On/Off

To turn the massage function on, press the power button. The correspond-
ing LED will illuminate to indicate power on. To turn the massage function off,
press the power button again. As the chair is powering off, the power button
LED will flash and the mechanism will automatically move to the bottom of the
chair where it will "park" for the next use. No other buttons or functions will be
available during the parking. Once the mechanism has parked, the power LED
will turn off.
Note:
Heat only
Shiatsu Programs
works with
Once the chair is powered on, you can select a massage program.
massage
function
Upper Back: Press the button labeled "Upper Back" to select the massage
activated
program for that area. The corresponding LED will illuminate to indicate that
program is engaged. To end the upper back program, press the button a
second time. The LED will turn off.
Lower Back: Press the button labeled "Lower Back" to select the massage
program for that area. The corresponding LED will illuminate to indicate that
program is engaged. To end the lower back program, press the button a
second time. The LED will turn off.
Full Back: Press the button labeled "Full Back" to select the massage program
for that area. The corresponding LED will illuminate to indicate that program is
engaged. To end the full back program, press the button a second time. The
LED will turn off.
Heat
To use heat during any massage program, press the "Heat" button.
The corresponding LED will illuminate to indicate that the heat function is on.
To end the heat function, press the heat button a second time. The LED will
turn off. Please note that the heat function CANNOT be used without the
massage function.
Demo
To cycle through all the massage programs and heat, press the "Demo"
button. The corresponding LED will be flashing to indicate the demo mode
is functioning. Please note that if no other massage program is selected, the
massage mechanism will park at the end of the demo cycle.
9