Publicidad
Idiomas disponibles
Idiomas disponibles
Nozzle
equipped
with
cam-lock
coupler
OPW offers a cam-lock connector for
our standard 190 manual nozzle, for use
with "The Stopper".
This new cam-lock connection provides
for reliable, high flow and mess-free bulk
fuel deliveries.
Additional nozzle features include:
Lightweight aluminum body, dual poppets
for easy opening against inlet pressure,
four position hold-open latch and large
lever area for maximum grip.
FILLING PROCEDURES:
1. Make sure the nozzle is equipped with the appro-
priate coupler to achieve an adequate connection.
2. Attach the coupler to the adaptor.
3. Turn on the pump.
4. Slowly open the nozzle.
5. Monitor the liquid level gauge during fill.
6. Watch for any quick movement of the hose
which indicates that shut-off has occurred.
DISCONNECTION PROCEDURES:
1. After shut-off has occurred, close the nozzle.
2. Turn off the pump at the transport vehicle.
3. Re-open the nozzle and wait approximately
2 minutes. This allows the pressure in the hose
to be reduced.
© Copyright 2000, OPW Fueling Components
CAUTION! ATTEMPTING TO DISCONNECT THE
COUPLER WITH PRESSURE IN THE HOSE WILL
RESULT IN THE RELEASE OF PRODUCT.
4. Close the nozzle and slowly uncouple the
connection.
5. Remove the nozzle carefully and replace the cap.
Printed In USA
Publicidad
