Other Features; Adjusting Loudspeaker Volume; Talking To Your Baby; Adjusting Microphone Sensitivity - Philips SCD488 Instrucciones De Manejo

Other features

EN
10

Adjusting loudspeaker volume

• Briefly press the volume + and – buttons (A-4) on the baby
unit repeatedly until the desired loudspeaker volume for the
baby unit has been reached.
• Briefly press the volume + and – buttons (B-9) on the parent
unit repeatedly until the desired loudspeaker volume for the
parent unit has been reached.
Notes:
– If you press the Volume + and – buttons (A-4, B-9) too long,
the volume will not be adjusted.
– If the volume is set to a high level, the units consume more
power.

Talking to your baby

While using the TALK button (B-1) on the parent unit you can
talk to your baby (e.g to comfort your baby).
• Press and hold the TALK button (B-1) and talk clearly into
the microphone (B-4).
• Release TALK button (B-1) when finished talking.
Note:When the TALK button (B-1) is pressed, you can no
longer hear your baby.

Adjusting microphone sensitivity

You can set the sound sensitivity of the baby unit, to the desired
level.When set to the maximum sensitivity level all sounds
(including your baby's breathing, when loud enough) can be
heard on the parent unit.You can only change the microphone
sensitivity if the connection between the baby unit and the
parent unit is established (when LINK lights (A-2, B-7) light
continuously green).
1 Briefly press the SENSITIVITY button (B-2) on the parent
unit.
> The sound-level lights (B-8) give visual feedback on the
current sensitivity level for approximately 2 seconds.