GB
7.Plug the power cord into the wall socket, then set the control
knob to position"1", " 2" or "P", set the control knob to position "0" to
switch the appliance off after 1 minute.
Tips: While the motor is running, if you want to add ingredients you
can:
Turn the inner lid off the lid in the direction
of anticlockwise.
Add the ingredients into the jar through the
opening in the lid.
8.After you have done you work, set the control knob to position"0",
unplug the appliance ,and pour out the drink.
Tips for use
1.Liquid ingredients: dairy produce, juice, sop, drink, paste, milk
shake and so on.
2.A combination of soft ingredients: milk, papaya, mayonnaise.
3.Make cooked pulpy ingredients: baby food
The function of ICE
The operation method of ICE like the method of blend. Put 8~10
pieces of ice which is not big than 2 centimeter in the jar, press the
lid into place, plug the power cord into the wall socket, then set
the control knob to position "P" for 1 second to 2 seconds, then
set the control knob to position "0" for 1 second to 2 seconds, do
as this for 6 cycles to 10 cycles.
CAUTION: please press the lid when you use the function of ICE.
05
Cleaning and Caring
Cleaning
The appliance is easier to clean if you do so immediately
after use.
1.Unplug the appliance, remove the jar, grinding up from the
base, remove the blending blade assembly from the jar, and
remove the grinding blade assembly from the grinding cup.
2.Clean these parts with the cleaning brush in warm water
with some washing-up liquid and rinse them under the tap.
3.Clean the base with a damp cloth, never immerse the
motor base in water not rinse it under the tap caring.
4.Avoid touching the sharp blades, especially when the
appliance is plugged in.
Caring
1.Please store the appliance on dry environment.
2.Never put the jar, or any other parts, in a microwave oven.
3.This appliance is fitted with a device to protect it in the
event it becomes overloaded or overheats. If the appliance
stops without warning for any reason, do the following:
⑴. Switch off (O) and unplug the appliance.
⑵. Allow the appliance to cool down for 15 min
⑶.Once cooled down the protection device will automatically
reset and the appliance can be used normally again.
GB
06