Flash Modes; Self-Timer; Power Save Feature - Olympus FE-130 Manual Del Usuario

Ocultar thumbs Ver también para FE-130:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
Press Y# repeatedly to select the flash mode and press F.
2
Press the shutter button halfway.
When the flash is set to fire, the # mark lights.
3
Press the shutter button completely to take the picture.
Flash working range:
W (max.):Approx. 3.3 m (10.8 ft.)
T (max.): Approx. 2.0 m (6.6 ft.)
Icon
En
No
Auto flash
indication
Red-eye
!
reduction flash
#
Fill-in flash
$
Flash off
1
Press NY to select [Y ON] and press F.
2
Press the shutter button fully to take the picture.
The self-timer lamp lights for approximately 10 seconds
after the shutter button is pressed, then starts blinking.
After blinking for approximately 2 seconds, the picture
is taken.

Power Save Feature

To save battery power, the camera automatically enters sleep mode and stops
operating if not used for approximately 3 minutes. Operate the shutter button or
zoom lever to reactivate the camera.
If the camera is not operated for several hours after the camera enters sleep mode,
it automatically retracts the lens and turns off. To resume operation, turn on the
power again.
14

Flash Modes

Flash Mode
The flash fires automatically in low light or backlight
conditions.
The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
The flash fires regardless of the available light.
The flash does not fire even in low light conditions.

Self-Timer

Description
Self-Timer Lamp

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

X-720X-740Fe-140X-725

Tabla de contenido