Allen + Roth LWS0547G Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
4. Pull the fixture wires and ground wire up through
the fixture chain (B), alternating links.
5. Unthread the canopy lock ring preassembled to
crossbar assembly (A) and slide it and the
canopy (D) down the fixture chain (B). Push all
slack fixture wire through canopy chain loop on
crossbar assembly (A) and into outlet box. Trim
excess fixture wire, leaving a minimum of 6 in.
hanging out of the outlet box.
6. Attach ground fixture wire to either the green ground
screws preassembled on the crossbar assembly (A)
or to the ground wire in the outlet box (usually
GREEN or BARE). If attaching fixture ground wire to
the crossbar, it is imperative the outlet box in your
home be properly grounded. Connect the neutral
(WHITE or RIBBED) fixture wire to the neutral
(usually WHITE) wire from the outlet box. Connect
the hot (BLACK or SMOOTH) fixture wire to the hot
(usually BLACK) wire from the outlet box. Fasten
wires together with a wire connector (AA) and tightly
wrap wire connector (AA) with electrical tape (not
included).
Hardware Used
Wire
AA
Connector
4
5
6
From Outlet Box
From Outlet Box
Bare, or Green
From Outlet Box
Bare, or Green
From Outlet Box
x 3
5
B
Supply Wires
Canopy Chain
Loop
B
Canopy
Lock Ring
BB
Ribbed Side
White Wire
From Fixture
Smooth Side
Black Wire
From Fixture
Bare, or Green
Ground Wire
Fixture Ground Wire
OR
Ground Wire
Green Ground Screw
Lowes.com/allenandroth
Outlet Box
D
White or
Black or