How To Use - Fenix PA-609M Manual De Instrucciones

ENGLISH

4. HOW TO USE

1. Assemble the base of the tower. The truss
(T1) and the truss-corner (T2) with the
connectors (A). The truss-corner and the box
with the connectors (B). Assemble both sides
of the box (T3).
2. Once the base is assembled, stabilize it
with the stabilizers (C).
3. Connect the hinge (D) to the box (T3), and
also connect the motor-support (E) in case
you are using one.
4. Place the trusses horizontally (T4, T5,
T6), as well as the top (T7), at the side of the
structure.
5. Join together the horizontal truss structure
with the upper hinges (H), and secure it with
safety pins.
B
T2
C
E
12 12
T3
T1
D
6. Before rising the tower using a motor (Z),
pass the chain (J) through the top (T7) and
tie it up with a shackle (F) and sling to the
truss. Thus, the motor will help to raise the
tower.
7. In case of using a manual winch, attach it
to the ring (I) in the top of the tower. Raise
the tower manually by pulling it from behind
with the help of cables and slings and pushing
the truss structure from the front. Secure it
using the safety pins (K).
8. Fix the frontal braces (L) at both sides of
the structure to secure it and give ballast.
ATTENTION:
DO NOT LOAD THE TOWER BEFORE
PLACING THE BRACES.
A