Beco HBS7750X Manual Del Usuario página 8

Important safety and
1
environmental instructions
1.5 Things to do for energy saving
Follow the times recommended in the manual during use. Unplug the
appliance after use.
1.6 Plug Wiring
The moulded plug on this appliance incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same
rating must be used. Do not forget to refit the fuse cover. In the event of
losing the fuse cover, the plug must not to be used until a replacement
fuse cover has been fitted. Colour of the replacement fuse cover must be
the same colour as that visible on the pin face of the plug Fuse covers are
availabe from any good electrical store.
• Fiting a different plug
• As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals on
your plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
• Green/yellow cable must be connected to ground (E)
8 / EN
line
Hand Blender/User Manual