Vertilux VTi 6-710-SP-00400 Manual De Programación página 4

Adjusting the motor limits
1. Press and hold the
step 3.
2. On the wall control press either
If the button you pressed does not start the motor,
try the opposite direction
stop button
move and press the
reach the first desired limit. Remember which
direction button you selected in this step.
3. You can now release the
4.
On the wall control, press the
button of the one selected in step 2, this will
bring the panels to the initial position in the
middle of the track where they were. The first
limit has now been set.
5.
Press and hold the
step 7.
6.
On the wall control, press the
button of the one selected in step 2. Let the
motor move and press the
panels reach the second desired limit.
7. You can now release the
8. On the wall control, press the
button as the one selected in step 2. Both motor
limits have been adjusted.
IMPORTANT: Secure the motor settings by covering the
blue button until you reach
direction button.
button. Let the motor
when the panels
blue button.
opposite direction
red button
until you reach
opposite direction
stop button when the
red button.
same direction
limit setting buttons
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
DIRECTION
BUTTON
BLUE
BUTTON
OPPOSITE DIRECTION
BUTTON
OPPOSITE
DIRECTION
BUTTON
BUTTON
DIRECTION
BUTTON
with their cover.
vertilux.com
BLUE
BUTTON
STOP
BUTTON
RED
BUTTON
STOP
BUTTON
RED
3