Safety Instructions - Hammerhead HLCL04 Manual Del Usuario

SAFETY INSTRUCTIONS

Safety Instructions for Laser Line Level
WARNING
LASER RADIATION. Do not stare into beam. Class II laser product. Turn the laser
beam on only when using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam can
cause flash blindness.
• Do not operate the tool around children or allow
children to operate the tool.
• Do not place the tool in a position that may cause
anyone to stare at the laser beam, whether
intentionally or unintentionally.
• Do not use on surfaces such as sheet steel that
have shiny, reflective surfaces. The shiny surface
could reflect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on increases
the risk of someone inadvertently staring into the laser beam.
• Do not attempt to modify the performance of this laser device in any way. This
may result in a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the laser device. If unqualified
persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by qualified service
personnel.
• Use of other accessories that have been designed for use with other laser tools
could result in serious injury.
• Do not operate the tool outdoors.
• Do not place or store tool under extreme temperature conditions.
LASER LINE LEVEL
AVOID EXPOSURE/EVITE LA
EXPOSICIÓN/ÉVITEZ L'EXPOSITION
LASER RADIATION IS EMITTED FROM
THIS APERTURE / LA RADIACIÓN LÁSER
SE EMITE DE ESTA ABERTURA / CET OUTIL
PRODUIT UN RAYONNEMENT LASER
CAUTION / PRECAUCIÓN / ATTENTION
LASER RADIATION – DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL
RAYO RAYONNEMENT LASER – NE FIXEZ PAS DES
YEUX LE RAYON LASER
650nm, OUTPUT ≤ 1mW/CLASS II LASER PRODUCT
COMPLIES WITH 21 CFR PARTS 1040.10 AND 1040.11
PRODUCTO LÁSER CON SALIDA ≤ 1mW.CLASE II, 650 nm,
CUMPLE CON LAS SECCIONES 21 CFR 1040.10 Y 1040.11
650 nm, SORTIE ≤ 1 mW/PRODUIT LASER DE CLASSE II
CONFORME AUX NORMES 21CFR ARTICLES 1040.10 ET 1040.11
Model / Modelo / Modèle: HLCL04
3V 2X1.5V AAA Battery
Laser Line Level
3V Batería 2X1,5 V AAA
Nivel De Línea Láser
3V 2 piles AAA de 1,5 V
Niveau De Ligne À Laser
CAN ICES-3(B)/NMB-3(B)
MADE IN CHINA SERIAL NO.
HECHO EN CHINA SERIE NO.
FABRIQUÉ EN CHINE NUMÉRO DE SÉRIE
3