Surface Mount Installation - Home Decorators Collection 83011 Guía De Uso Y Cuidado

Surface Mount Installation

1
INSTALLING THE MOUNTING BRACKET
IMPORTANT: If you are not fastening your cabinet to a structural wall member, please follow
Wall Anchor Use above before installing the bracket (JJ) and screws (II).
NOTE: The bottom of the cabinet should be a minimum of 3 in. above the faucet.
□
Find and mark the desired location for the mounting bracket (JJ) and pan head screws (II).
□
Use the level and measuring tape to ensure a level line and correct positioning.
□
Install the pan head screws (II) through the mounting bracket (JJ) slots and into the wall.
2
MARKING THE TOP CAM SCREW LINE
□ □ Mount the cabinet (AA) onto the mounting bracket (JJ)
ensuring that the mounting bracket (JJ) lip locks into
the cabinet channel lip (see Figure 1 for detail view).
□
Insert the level alignment tool (BB) into the top
cabinet (AA) track, sliding to either side.
□
Use the level alignment tool (BB) and pencil (CC)
to draw the CAM screw
□
Remove the cabinet (AA) from the mounting bracket (JJ).
3
INSTALLING THE TOP CAM SCREWS
IMPORTANT: If you are not fastening your cabinet to a structural wall member, please follow
Wall Anchor Use to install the wall anchors before installing the CAM screws (MM).
□ □ Mark the CAM screw (MM) positions at the desired locations along the level line.
Note the CAM screw position distance and alignment as it will be used in Step 4.
□
Fasten the CAM screws (MM) to the wall until the screw barrels touch the wall surface (see Figure 2 ).
4
INSERTING THE CAM MOUNTING HARDWARE
□ □ Install two CAMs (NN) into the cabinet channel
of the top frame.
□ Slide CAMs (NN) into the desired mounting
positions (noted in Step 3) with the alignment
arrow facing the wall (see Figure 3).
5
INSTALLING THE CABINET TO THE WALL
□ □ Mount the cabinet (AA) onto the mounting bracket (JJ) ensuring
that the bracket (JJ) lip locks into the cabinet channel lip as
completed in Step 2. (See Step 2, Figure 1 for a detailed view.)
□
Position the cabinet (AA) on the wall aligning each CAM (NN)
with a CAM screw (MM).
□ Tighten both CAMs (NN) with a Phillips #2 screwdriver, turning
clockwise until each CAM is fully engaged onto a screw
head (MM), with the alignment arrow facing away from the wall.
□
Ensure that the pan head screws (II) are fully tightened.
6
ATTACHING THE SIDE MIRRORS
□ □ Attach the four side mirror brackets (HH) to the cabinet (AA)
sides with the pan head screws (EE), washers (GG) and
snap caps (FF) to cover the screw heads as illustrated.
□
Remove the paper on the tape on the brackets (HH)
and stick the side mirrors (RR) to the side mirror
brackets (HH).
NOTE: Please make sure the side mirrors (RR) are aligned
with the cabinet (AA) before attaching the side mirrors (RR).
(MM) line.
AA
JJ
Figure 1
NN
NN
MM
NN
II
JJ
II
RR
Level
Line
II
BB
MM
Figure 2
Arrow Alignment
NN
MM
Alignment
Arrow
AA
GG
EE
FF
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
JJ
CC
Figure 3
NN
MM
HH
RR