Prime TNIDEZ1 Guia De Inicio Rapido

EZ-SET 24-HOUR
DIGITAL TIMER
STEP 1 - Set the current time
• Plug in the timer and let it
charge for 30 minutes.
• Press the "HOUR" button
until you reach the current
hour.
• Press the "MIN" button
until you reach the current
minute.
ADDITIONAL FEATURES
Manual ON/OFF OVERRIDE
Press "ON/OFF" to bypass the
10 : 30
current settings and
OFF
temporarily turn your attached
device ON or OFF. (Note:
HOUR MIN SET ON
Timer setting will resume
based on the next
programmed cycle.)
MODEL #TNIDEZ1
PROGRAMMING INSTRUCTIONS
Congratulations on your recent purchase of the
EZ-SET 24-hour digital timer. With just three easy
steps, your timer will be ready to go.
1. Set the current time.
2. Set the time you want your device to turn ON.
3. Set the time you want your device to turn OFF.
STEP 2 - Set the ON time
• Hold down the "SET ON"
12 : 00
button and press the
ON
AM
OFF PM "HOUR" and/or "MIN" button
until your desired ON time is
HOUR
MIN SET ON SET OFF ON/OFF
reached.
On to step 2
Hold down the "HOUR" or "MIN" button and you can
quickly advance through the hours and minutes!
TROUBLESHOOTING
PROBLEM
Lights do not
PM
turn on, even
SET OFF ON/OFF
when timer is
in "Always On"
Reset position.
Lights do not
turn on and off
at programmed
times.
12 : 00
ON
OFF
HOUR MIN SET ON
Reset
On to step 3
POSSIBLE CORRECTIVE
CAUSE ACTION
Lights are not in Be sure lights are
"ON" position. functional by plugging
Lights are not them directly into the
functioning or outlet. Be sure that the
timer is not lights are in the "ON"
receiving power. position if they have their
own switch. Be sure the
outlet the timer is plugged
into is active.
Timer is not set Reset the timer according
properly. to PROGRAMMING
INSTRUCTIONS of this
manual.
12 : 00
ON
OFF
HOUR
MIN SET ON
STEP 3 - Set the OFF time
• Hold down the "SET OFF"
button and press the
AM
PM
"HOUR" and/or "MIN"
button until your desired
SET OFF ON/OFF
OFF time is reached.
• Plug your timer into the
Reset
wall and your device into
the timer.
IN CASE OF POWER FAILURE
Timer will continue to operate on battery backup if the
power goes out; however it will not turn attached devices
on or off. Once power is restored, programming will
resume. If power remains out longer than the battery
backup will operate, re-program the timer as explained in
Steps 1, 2 and 3 of the "Programming Instructions".
NOTE: Battery is permanently installed and not
replaceable. It automatically recharges when power is
provided to the timer.
AM
PM
SET OFF ON/OFF
Reset
12 : 00
ON
AM
OFF PM
HOUR
MIN SET ON SET OFF ON/OF
FINISHED!!!