Features
Mixer Release Button
Use this feature to release the mixer
Bowl Rest
™
This feature can be used on most
CAUTION! Pinch Hazard. Never use
Bowl Rest when mixer is on.
NOTE: Do not use Bowl Rest on small
(1
⁄
quart) mixing bowls or plastic
1
2
mixing bowls.
Using Your Mixer
1. Always make sure mixer is unplugged
and OFF before inserting beaters,
using as a hand mixer or assembling
on the stand.
2. Plug mixer into electrical outlet.
3. Move the speed control to desired
speed, starting at 1 and increasing
to a higher speed as necessary.
4. If using as a stand mixer do not
leave mixer unattended. Always
monitor the progress of the mixing.
5. When finished mixing, move the
speed control to OFF and unplug
mixer.
840162303 ENv02.indd 5
840162303 ENv02.indd 5
QuickBurst
Press and hold down the button for
from the
QuickBurst
"locked" position
on the stand.
Shift and Stir
Use the lever to move the turntable.
large mixing
bowls. Use the
Bowl Rest while
adding ingredi-
ents or checking
a recipe. To use,
TURN MIXER
OFF, then set
the mixer on the
edge of the bowl.
6. To eject beaters, push straight down
7.To remove mixer from stand, hold
™
additional power
at any speed.
™
NOTE: Never use
QuickBurst
for more than
two minutes at
a time or motor
may overheat.
Bowl Lever
™
This allows you
to position the
beaters near the
edge of the bowl
or in the center
for better mixing
performance.
Bowl
Lever
mixer and press mixer release
button. Pull mixer to release from
stand.
on the eject
button.
5
5/9/14 7:11 AM
5/9/14 7:11 AM