Maintenance, Cleaning And Storage - Kalorik FP 39794 Manual Del Usuario

Fax +1 305 430 9692

MAINTENANCE, CLEANING AND STORAGE

Check prior to any assembly or disassembly that the power cord
•
is not connected to the wall outlet.
Turn the pitcher (b) counter-clockwise to unlock it and lift from the
•
base (d).
Lift the strainer assembly (g+h) with the reamer(s), away from the
•
pitcher (b).
Gently remove the reamer(s) from the strainer assembly (g+h).
•
Gently separate the 2 reamers (f + e) if inserted into each other. It
•
helps holding the wings of the small reamer in one hand, while
gently pressing on both sides of the big reamer above the wings,
between thumb and index finger of the other hand, and lifting.
Clean all the accessories of the appliance in warm soapy water
•
and rinse them with clear water. Do not put the accessories in the
dishwasher. Pat dry before reassembling all the parts.
Never put the motor block in the dishwasher. To clean the motor
•
housing, wipe with slightly damp cloth, only when necessary.
Never immerse the motor housing in water or any other liquid.
For storage, reassemble the unit completely after cleaning and
•
drying, and place the transparent cover (a) on top of the unit to
protect the parts from dust.
The base is equipped with cord storage, where excess cable
•
lengths can be coiled.
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
6
Assembly page 6/24
special instruction from Team
FP 39794 - 120501