Ace Ever GAZ201490/5055 Manual De Instrucciones página 3

Assemble pole and crossbeam
Important: pay attention to difference
of crossbeam B and C
Using wrench (L) and screw bolt (H)
separately connect crossbeam (B) and
(C) with pole (A) (Fig.1)
then connect crossbeam (B) and
(C) with screw bolt (H)(Fig.2)
Connect the ribs with Hub
Connected the top of the ribs(F) and (E)with the hub(G) Fig4 by turns,
then insert the ribs (D) into rib (F)(FIG.3)
Warning: Push down the spring bottom to fully insert the parts
Put the canopy(J) onto ribs (Fig.6).Then fix the pole bottom with 2 pieces peg(k)
Then insert the connected top (D,E &G) into the pole and middle
of the crossbeam(Fig.5)