Hardware Specification - Centronics 4008T Instrucciones De Instalación

DESCRIPTION:
The 4008T 32Bit PCI bus Plug & Play 1P I/O card is equipped with one SPP/BPP
IEEE 1284c CENTRONICS Parallel Interface. The 4008T include one 25 pin female
connector for attaching peripherals' units with IEEE 1284C CENTRONICS Parallel
Interface.
Check your packing listing:
4008T Card
Software Driver on CD
Hardware Guide on CD

Hardware Specification

Parallel Port:
Parallel Chipset:
Compatible chips:
IEEE standard:
Max. Speed::
Hardware Jumper and Connect
Hardware installation guide:
•
Turn off the power of your computer
•
Plug-in the 4008T MIO Parallel Adapter to PCI bus of your computer
•
Add-on the peripheral (Printer, Modem, Scanner... etc.) that you need to this
Adapter
•
Turn on the power of your computer
PCI device listing display (for example...)
Bus No Device
No
0 7
0 13
•
After the Screen, your Card install correct, you can install WINDOWS
95,98,NT, 2000 or LINUX. Please see INSTALL GUIDE
SUN1888, Hardware FIFO are 32Byte FIFO
with ACC3203, ST-78C36 and HT6535
ECP/EPP/SPP/BPP (PS-II) Interface
Up to 2.7 MB/Sec
P 1
Func Vendor
No ID
1 8086
0 1409
Device Device Class
ID
IDE Controller
7010
7268 Simple COMM.
Controller
IRQ
14
10