Iso Din Head Unit Provision - Metra 99-8716B Instrucciones De Instalación

ISO DIN head unit provision

1. Attach the trim covering to the bottom
of the 99-8716 radio housing using the
factory hardware. (Figure A)
2. Mount the ISO Brackets to the head unit
with the screws supplied with the radio.
(Figure B)
3. Slide the head unit into the radio
opening until the side clips engage.
(Figure C)
4. Snap the Trim plate into the radio
housing. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-8716B
5
(Figure A)
(Figure B)
(Figure C)