Hardware Installation - Air Live P-201 Guía De Configuración Rápida

Hardware Installation

This package contains the following components:
One Print Server
One Antenna (Only for Wireless Print Server)
One Power Adapter
One Quick Installation Guide
One CD-ROM (Including all the software utilities, drivers and
User's Manual)
1. Unpack the print server package and verify that all the items listed in
the previous section are provided
2. Connect the print server to the printer you want to share on the
network.
3. Connect the print server to your network by attached the network
cable to the UTP port of the print server
4. Connect the power adapter to the print server. The print server will
perform the Power-On-Self-Test (POST) after it is powered on.
During the POST, the Printer Port LEDs will be on. When the LEDs
are unlighted, the print server is ready.
Note: You must use the power adapter shipped along with the print
server, do NOT use any other power adapter from other sources..
Driver and Utility installation
The Driver and Utility Program executes a wizard-driven
procedure that performs the following tasks:
Install all necessary Printer Server Network Driver and utilities
Automatically add all Network Ports to your PC.
Wired / Wireless Printer Server
English
2
2