Important Information Before Use
with a cu for blood pressure measurement during venous
infusion.
a ect the measuring accuracy.
movable metal ball is built in the gravity-sensor for detecting
the orientation of the oximeter. When you want to change the
oximeter's display direction, if you move the oximeter too
slowly, the movable ball will also move slowly because of not
enough acceleration. Consequently the response of orientation
detection would be delayed. Please move the oximeter with a
bit of force if you want to change the display direction (such as
bend/extend your nger quickly), so an acceleration is provided
to the gravity-sensor for quick sensing the orientation change.
oximeter, there is a small metal ball which is movable within
its compartment of the gravity sensor. Therefore you may hear
a slight "clatter" sound when you wave or shake the oximeter. It
is normal and not caused by an unwanted part.
accuracy of the measurement.
8