Installation To Threaded Rods - PEERLESS Mounts Precision Gear PRG Serie Hoja De Instrucciones

Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the
4
desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods
using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.
Skip to step 5.
1/4-20 THREADED ROD
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
fig. 4.1
Visit the Peerless Web Site at www.peerlessmounts.com
A
ARROW
INDICATES
FRONT OF
MOUNT
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
6 of 33
For customer care call 1-800-865-2112 or 708-865-8870.
1/4-20 THREADED ROD
(NOT INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
A
ARROW
INDICATES
FRONT OF
MOUNT
fig. 4.2
ISSUED: 02-13-07 SHEET #: 055-9485-1