Inspecting
This re table must be inspected regularly to ensure that the product is safe to use and to extend product life.
!
WARNING
DO NOT inspect this re table until the re is COMPLETELY out.
1. Make sure all parts are securely fastened in place. If a part moves when touched, check its connection points to
see if they are lose.
2. Check all gas connections for leaks.
3. Check ignition system to insure proper sparking.
4. Check components for any signs of damage, rust or excessive wear.
5. If damage to any component is detected, DO NOT operate until the proper repairs have been made.
!
WARNING DO NOT tamper with this appliance. This is DANGEROUS and will void the warranty. Any part found to
be faulty must be replaced with an approved part, con rmed by the manufacturer. For technical support contact
Real Flame at: 1-800-654-1704.
General Care and Cleaning
1. This re table should be cleaned regularly to ensure safe use and extended product life.
NOTE: After repeated use, a slight discoloration of the nish may occur.
!
WARNING
DO NOT attempt to clean this re table unless the re is completely out and the unit is
cool to the touch.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT USE SOLVENTS while in closed spaces or while smoking.
Table
1. Wipe exterior surfaces with a mild dishwashing soap, then rinse clean with water.
Storage:
!
WARNING
1. Turn gas OFF at tank connection. Remove tank and store in a cool, dry location outdoors, away from children.
2. Carefully remove ller and store components at to protect them from breakage.
3. ALWAYS cover your re table when not in use. The cover will protect the mechanical components
from dirt and debris, prevent water from pooling on surface of the re table and will prevent fading and
discoloration of the nish.
4. Store in a cool, dry location away from children and pets.
CARE AND CLEANING
14