Human Touch Perfect Chair PC-075 Manual De Uso Y Cuidado página 4

get ready
UNPACK THE BOXES
Chair frame
Headrest frame Head sock
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
2. Secure the body pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
humantouch.com
Arm cap (2) Phillips-head
screwdriver
Body pad
Head pad Head pillow
4
Your Human Touch Perfect Chair
®
attach the headrest frame, pads, arm caps, and head pillow, and you're done!
ATTACH THE HEADREST FRAME
1. Raise the chair to an upright position.
For your convenience, and to better position the chair for the
remaining assembly, plug in the chair, then use the electric recline
lever to adjust the chair to an upright position.
CAUTION: Plug the chair into an appropriate power source.
Be sure that the power cord lies beneath the mechanics
located underneath the chair.
2. Remove the headrest frame screws.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
3. Insert the headrest frame into the backrest frame.
With the arc of the headrest frame pointing toward the back of the chair, slide
the two ends of the headrest frame into the open tube ends at the top of the
backrest frame.
4. Replace the headrest frame screws.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
5 5
requires some simple assembly. Just
®