Date Of Manufacture - Werner A510002 Instrucciones Y Manual De Operación

INSPECTION AND MAINTAINANCE LOG
Date a P t r
Inspection:
conditions exist then inspections must be carried out more frequently. All inspection
results must be logged in the space provided above.
1.
2.
3. Inspect anchoring system for signs of damage or wear to spoons or cone.
4. Make sure the unit can rotate 360°
5. When reusing a previously drilled hole, inspect for for debris or wallowing.
6. Record inspection results in the space provide above.
unsafe conditions are found, proper disposal is required. The anchor connector
must be rendered unusable and then properly discarded.
MODEL NUMBER:

DATE OF MANUFACTURE:

N u m b r e C o m m e n s t Inspector Name