17. Insert the straight section of the Tow Arm with the 3 holes into the bottom of the
stroller through the two slots (Fig. 17a). Make sure the angle of the Tow Arm is
facing toward inside of the stroller (Fig. 17b).
Align the hole of the slot with one of the holes in the Tow Arm. Insert the Large Pin
through the hole and lock the Pin (Fig. 17c). NOTE: pull onto the Pin and then pull
onto the Tow Arm to make sure it is locked and secure.
Fig. 17a
Copyright © 2019, Petique, Inc., All Rights Reserved.
Assembly
Fig. 17c
Fig. 17b
| 12 |