Hardware Installation - IOGear GUH3C34 Guía De Configuración Rápida

Hardware Installation

1. Connect IOGEAR GUH3C34 to a USB Type-C port on your laptop.
2. Now you can connect your network device, (switch router, DSL/Cable
modem, etc.) to the adapter's Ethernet port using an Ethernet cable.
3. Plug the USB devices you wish to connect to your computer into
the GUH3C34.
Note: While this device is plug-n-play, you might need to
connect/disconnect the device after a system reboot. To avoid this,
please visit www.iogear.com and download the latest GUH3C34 drivers.
2