Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Carefully unpack unit and examine all packaging to be sure all parts are included
(See page 2).
2. Clean all parts prior to using.
3. Place unit on a flat stable surface.
4. Make sure Switch is "OFF" (O)
and power cord unplugged before
assembling.
5. Turn Locking Screw counter-
clockwise several turns to loosen..
Insert Grinder Head into Grinder
Base opening, twist to seat and
tighten screw clockwise.
6. Insert Feed Screw into Grinder Head, long end spindle first. Turn slightly until fully
set in Grinder Head.
7. Position Cutting Blade (cut edge facing outward to plate) onto Feed Screw. Make
sure blade is seated over 'square' shoulder of Feed Screw or meat will not grind
properly and Cutting Plate may be damaged.
8. Place desired Cutting Plate over end of Feed Screw and against Blade.
NOTE: Make sure "notch' is aligned with
'key' in Grinder Head and seated against
Blade.Thread Ring Nut to Grinder Head
and turn gently until tight.
9. Place Food Hopper on top of Grinder
Head.
10. Plug into 120 V outlet and you are ready
to begin grinding.
NESCO Food Grinder - A Healthier Diet
• With your own NESCO Food Grinder, you control the ingredients. You control
the amount of fats, salts and other additives, for a healthier diet. Chunky sandwich
spreads, savory appetizers, hearty soups, relishes and homemade sausage. These
and other dishes are so easy to make your way, for you and friends.
• You can make sausages out of any foods. Most butcher shops offer casings,
which you purchase fresh, just before you are ready to grind.
• Your NESCO Food Grinder is intended for processing relatively small
quantities. Meat needs to be cut into relatively small chunks and gristle should be
removed or it will likely clog the Feed Screw assembly. If grinder clogs, you can
easily clear the Feed tube by pressing the REVERSE switch button.
Assembly Instructions
4
Publicidad
Tabla de contenido
