Drive Medical Sky Manual De Instrucciones página 4

The Drive Bath Step is designed to make getting in
and out of the bath or tub easier. The Drive Bath Step
features a large flat slip proof stepping surface with
builtin non-slip pads. Two or more steps can be com-
bined to raise the height of the steps by following the
instructions below.
To combine bath steps, follow the instructions below.
1. Place bath step on flat surface.
2. Using a coin, remove each of the 4 white circles
located on the top of the bath step. Store these for
future use.
3. Place second bath step on top of first, lining up
prongs on underside of step with receptacle holes.
Press down firmly to secure in place.
Instructions