Philips HC210 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
XP SBC HC 210.1 SRS 07-04-2003 10:22 Pagina 5
General information
Surround sound SRS Headphone
The SBC HC 210 allows you to experience
an "out-of-the-box" surround sound
sensation! The immersive surround sound
technology in the SBC HC 210 headphone
transforms a stereo signal into a natural,
three-dimensional experience – without the
need for loudspeakers all around the room.
Auto mute for noise free operation
reduces the noise disturbance when the
sound signal is too low or not available.
Neodymium speaker drivers
for faster bass response and lower overall
distortion.
Kit contents
This IR headphone system consists of the
following accessories:
1 x SBC HC212 IR transmitter
1 x SBC HC215 IR headphone
1 x SBC CS030/00 12 Volt/200 mA AC/DC
adapter (for UK: SBC CS030/05
12 Volt/200 mA AC/DC adapter)
2 x Philips SBC HB550S rechargeable
R03/AAA (NiMH) batteries
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
1 recharge cable
Transmitter (figure 1)
1 IR transmitting LEDs – transmit audio
signal to IR headphone
2 SRS Headphone surround sound
button – push the button to switch on the
SRS Headphone surround sound
(the SRS Headphone logo will light up
when activated)
3 Power indication – lights up when in use
4 Power switch – power on/off switch
5 Recharging output – connect the
recharge cable to the output
6 DC power – connect to the 12 Volt/
200 mA AC/DC adapter
7 3.5 mm stereo headphone audio
input – connects your IR transmitter to an
audio source
Headphone (figure 2)
8 IR sensors – to receive IR waves from the
transmitter
9 Power indication – lights up when in use
10 Power On/Off – slide the switch to the
on or off position to switch the headphone
on/off
11 Recharging indicator – lights up when
the recharging cable is connected between
the headphone and the IR transmitter.
Completely empty batteries will be fully
charged after about 16 hours
12 Recharging input (figure 3) – switch
off the headphone prior to connecting the
recharging cable to the transmitter.The
recharging indicator on the headphone
must light up, indicating that the headphone
is being recharged
13 Volume – adjust volume to your desired
listening level
Controls
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sbchc210/00

Tabla de contenido