Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Fasten fi ve ANGLE BRACKETS (1) to the SKIRT (L). Use
å
fi ve 1/2" PAN HEAD SCREWS (18).
NOTE: Be sure the edges of the ANGLE BRACKETS are
å
even with the edges of the SKIRT.
Fasten the BOTTOM BRACKET (9) to the BOTTOM (E).
å
Use two 1/2" PAN HEAD SCREWS (18).
1
1
The molding on the other surface
of the BOTTOM should be here.
419188
L
18
1/2" PAN HEAD SCREW
(7 used in this step)
www.sauder.com
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Some assembly
(and snacks) required.
1
9
E
Page 5
Publicidad
