Targus Universal USB 3.0 DVHD-SV2K Docking Station with Power
Contents
GB
• Targus Universal USB 3.0 DVHD-SV2K Docking Station with Power
• USB 3.0 Cable
• AC Power adapter
• DC output cable
• Power tip
Workstation Setup
1. Connect all peripheral devices to the docking station.
2. Connect the Targus Universal Docking Station to your host device.
3. Windows will start installing the DisplayLink Driver automatically.
4. Follow the on-screen instructions until the installation is complete.
5. Identify the correct power tip (see chart above right), connect to the DC
power cable and then to the laptop.
NOTE: If your power tip is not included, contact Targus to order the correct
version.
3
Targus Universal USB 3.0 DVHD-SV2K Docking Station with Power
Power Setup
1.Locate the correct power tip
2. Connect to the
(test fit in laptop if needed)
Specifications
• DVI-I / HDMI Port (HDMI 2.0)
• 4 x USB 3.0 downstream ports (port marked with
iOS device charging at 2.4A max)
• 1 x USB-C port (USB 3.0)
• Gigabit Ethernet
• Audio In/Out ports (3.5mm headset connector)
• Security lock slot
• USB 3.0 cable
• DC Power In: 19.5V, 6.15A
• DC Power Out: 19.5V 90W max
Docking Station Diagram
DC Power Out
USB to Laptop Port
DC Power In
Power On / Off
Gigabit Ethernet
DVI
USB-C Port
Audio Headset Connector
4
3. Connect to your
power cord
laptop
supports BC 1.2 and
USB 3.0
HDMI
Lock Slot
USB 3.0 Port
(supports charging)