Aqua Medic T controller twin Manual De Instrucciones página 5

1. Included in shipment
The Aqua Medic T controller twin is generally delivered with a saltwater-resistant temperature sensor.
The unit is ready for connection. The units to be controlled (heaters, fans, coolers) are connected to
the double socket.
2. Description
Socket No. 1 is provided for controlling fans or coolers. The maximum output is approx. 1,200 Watt.
Due to the high starting current, cooling units may be connected only to a power consumption of
400 W. Heaters of any type (i. e. glass or metal aquarium heaters, low voltage heating cables with
transformer, warm water supply by a magnetic valve) can be connected to socket No. 2. The
maximum output again is approx. 1,200 Watt.
3. Installation
- Connect to 220 V power source.
- Place the temperature sensor into the aquarium and fix it with an Aqua Medic electrode holder.
After a few minutes, the actual aquarium water temperature is indicated.
Pict. 1: T controller twin
1. Socket No. 1 – cooling
2. Socket No. 2 – heating
3. OK button
4. Arrow keys to adjust the parameter
5. Set key
6. Temperature sensor incl. sucker
4. Adjustion
By pressing an arrow key, the display light will be turned on. To adjust the setpoint, press "SET" key.
If "LOC" appears, the display needs to be unlocked. The keys can be unlocked by pressing the "SET"
and arrow down key simultaneously until the current temperature is displayed. The temperature
display starts flashing and can be adjusted to the nominal value by the arrow keys.
After pressing the "SET" key again, the display goes to the setting for the control precision (OK lights
up). Use the arrow keys to set the desired value, usually 1°C. By pressing the "SET" key again, the
unit jumps back again to the alarm value.
When the setpoint plus adjusted alarm value is exceeded, you hear a beep. This value is also adjusted
by the arrow keys. If you hold the "SET" key for a little while, you will reach the menu for time
setting. The numbers are chosen by pressing "SET" and changed with the arrow keys. No socket can
5