Basic Operations - QFX TV-LED1911 Manual De Instrucciones

MAKE SURE ALL THE EQUIPMENTS AND AC ADAPTOR ARE
CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE
BEFORE KINDS OF OPERATIONS.

BASIC OPERATIONS

- Press POWER button on the top of this unit to POWER ON the unit (indicator light
displays in blue), press it again to POWER OFF the unit (indicator light displays in
red). Or press POWER button on remote control to POWER ON the unit (indicator
light displays in blue), press it again to STANDBY mode (indicator light displays in
red).
- Press SOURCE button on unit top or remote control to set the unit in TV mode.
SELECT WANTED PROGRAM
1. Press CH+ button to play next channel.
2. Press CH- button to play previous channel.
3. Press numeric buttons on the remote control directly to select wanted program.
Example : Track 9, press ＂9＂, three seconds later it will turn to track 9 automatically, or
press ENTER button to confirm directly.
Track 12, press ＂1＂ and ＂2＂, three seconds later it will turn to track 12 automatically,
or press ENTER button to confirm directly.
NOTE : If one frequency dot has more than one channel, for example, track 15-3,
press ＂1＂ and ＂5＂, then press ＂-/--＂ and ＂3＂, three seconds later it will turn to
track 15-3 automatically, or press ENTER button to confirm directly.
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume.
Available range: 0-100.
MUTE CONTROL
- Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on remote control to display the sources list.
- Press UP or DOWN navigation button to select desired input source, then press ENTER
button to confirm selection.
- Or press SOURCE button on unit top repeatedly to select desired input source.
Available options: TV, AV, YPbPr, HDMI, PC, Media.
13