Norcold N6 Serie Guia De Inicio Rapido

Kit Contents: K1
Tools Needed:
■ #2 Phillips head screwdriver
■ Anti-static wrist strap
■ Refrigerator Service Manual
This procedure is to be performed by
WARNING
!
authorized service personnel only.
ATTENTION
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
Replace Part
New Ref. Description
K1 A Optical Control Assembly
NI B Front Box
NI C Wire Harness Connector
NI Not included - Reference only
Your front box and optical control
NOTICE
assembly may look differently than
shown, but the replacement instructions
are the same.
1. Power OFF the refrigerator.
2. Remove (1x).
B
3. Remove A (2x).
4. Disconnect from wire harness.
C
5. Using new part, reverse steps 4 through 1 to replace and
reinstall.
6. Verify the unit is operational using each power source.
P.O. Box 1285
Ann Arbor, MI 48106
www.norcold.com
N6,N8,N1095 Series Optical Control Assembly
A K1
B
Questions 1-800-543-1219
637774, 637775
637776, 637777
637778, 637779
Service Kit
637780, 637781
637783, 637784
C
Part No. 637579B (08.12.2019)
637785