Understanding The Display - GE OPAL 2.0 Manual Del Propietário

Care and Cleaning
Removal of Mineral Deposits
purchase an Opal Cleaning Kit and follow instructions inside.
3. Clean the sensors with vinegar and wipe clean with water. After draining the vinegar, run
location of the sensors.
Cleaning the Bin and Tray
To clean the ice bin, remove the ice bin from the ice maker and clean with a soft cloth dampened with soapy water.
The drip tray should be wiped dry. Water left in this area may leave deposits. To clean the drip tray, remove the tray
not use solvents or chemicals.

Understanding the display

Power
The Power button, when pressed, will begin the ice
making process. When pressed, while ON, will turn the
Light
Toggle between the three modes by pressing the light
button until you reach your desired lighting mode.
Clean
The cleaning cycle is initiated by pressing and holding
49-9000029 Rev. 0
Do not use solvents or chemicals.
Making Ice Add Water
Defrosting Cleaning
Clean
Light
Hold 3 Sec
Indicator Lights
highlighted, your unit needs more water before it can
cycle to make ice or clean.
WiFi
ers can connect to their Opal and control it from their An
Do
Power