Publicidad
Install the Fixture
1A
FINIAL WASHER
THREADED NIPPLE
SMALL WASHER
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
2
3
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Secure the fixture to the post with post screws.
4
5
Screw the lamp into the socket.
Align the frame to fixture and secure them together using the small washers and thumb nuts.
6
7
Place the top cover and finial washer over the threaded nipple and secure them in place using the finial.
FINIAL
TOP COVER
THUMB NUT
FIXTURE
4
BLACK WIRE
HOT WIRE
POST
7
FRAME
6
5
LAMP
POST SCREW
WHITE WIRE
NEUTRAL WIRE
2
Use
MAX
120 volt,
100 Watt
Type A19 Medium Base Lamp.
Publicidad
