Faucet Installation - Black and Decker Price Pfister Wayland 48 Serie Guia De Inicio Rapido

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
•
• Plumber's putty Slotted screwdriver
• Pliers • Adjustable wrench
• Cloth
Your installation may require new supply lines and/or shut-off valves or other additional
tools.
4
A
E
D
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Faucet D Putty Plate
B Lift Rod E Pop-Up Assembly
C Wingnuts (2x)
If any of these items are missing, please contact Price Pfister Consumer Service at
1-800-Pfaucet (1-800-732-8238).
ENGLISH
• Philips head screwdriver
• Flashlight
B
C
2

FAUCET INSTALLATION

5
5C
5A
5D
5D
5 FAUCET INSTALLATION
Place a bead of plumber's putty in the groove along the bottom outer edge of Bottom
Plate (5A). Place Bottom Plate (5A) under base of Faucet Body (5B). From above sink,
insert Threaded Shanks (5C) through End Holes (5D) of sink. Be sure that the "Price
Pfister" marking is facing forward.
6
6B
6 SECURING FAUCET
Align Faucet (6A) to sink surface. From underneath sink, secure Faucet using Wing
Nuts (6B). Hand tighten.
5B
5C
BOTTOM GROOVE
6A