Search for code list
1. Turn on the TV, look at the code list for the one that matches the brand of your TV.
2. Once located the code, press the Set button / ok until the LED indicator lights, then release
the button.
3. Insert three-digit code for your TV, LED indicator light turns off.
4. Press the On / Off, if your TV is turned off the remote control is set up.
5. Check out other functions, if the TV does not respond correctly, repeat steps 1 to 4, using
a new code.
Quick search by button
1. Turn on the TV and point the control to it.
2.-Press the Set / ok for 8 seconds, the LED indicator blinks, then
release it until you see the symbol of volume on the TV screen.
3.-Check that the remote control performs the most of your TV functions
properly. Otherwise, repeat the process.
Note: When changing batteries, the control will not lose the current configuration.
ON
Set/ok
SET
12
45
78
7