Slime M50048-2 Guia De Inicio Rapido página 3

AIR ONLY INSTRUCTIONS:
1
2
3
TROUBLESHOOTING:
Inflator fails to operate when plugged in:
1. Check fuse in power cord.
2. Check vehicle fuse.
3. Check battery charge.
4. Ensure connection is secure.
5. Make sure connectors and terminals are free of corrosion, debris, etc.
Inflator runs but does not inflate:
1. Be sure the connector is tightly screwed on the valve stem as far as possible.
2. Check tire for leaks, and check hose for breaks and leaks at fittings.
Inflator runs slowly:
1. If overheated from excessive use, shut it off and allow to cool for 25 minutes.
2. Voltage too low, check condition of battery.
NOTE: If tire is totally deflated, it is possible that the tire could separate from the rim
allowing air to leak out when trying to inflate. In the event this situation occurs, you will
have to jack up the tire prior to inflation.
1. Attach (black) air hose to tire valve stem.
2. Plug inflator into accessory power outlet. Do not run
vehicle while inflator is operating. You may need to
be in "accessory" or "on" position. Please make sure
emergency brake is set and car is in park.
3. Push green button to turn system on. Inflate tire as
needed. Turn system off and check tire pressure. Once
correct tire pressure has been achieved, disconnect air
hose and power plug.