allen+roth FHTA80129 Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
1. Carefully place the table top (2) upside down on a soft surface. Failure to do
so could result in damage or scratches to the table top. Attach table leg A (3),
table leg B (4) and table legs C (5) to the table top (2). Use bolt and washer (AA).
Hardware Used
2. Attach side panels A (6) to the table legs (3, 4 & 5). Use bolt and washer (AA).
Hardware Used
3 Attach the gas barrier (8) to the table leg A (3) and table leg B (4).
.
Use bolt and washer (AA).
Hardware Used
4 Attach the tank base (9) to the table leg A (3), table leg B (4) and table legs C (5).
.
Use bolt and washer (AA).
Hardware Used
1
x 4
2
x 12
3
x 2
4
x 4
8
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.