11. Align the < > marks on the duplex unit B
and the printer, and vertically insert the
connector on the duplex unit B into the
connector on the printer.
When the duplex unit B is securely
connected, it is locked.
12. Firmly tighten the screw on top of the
duplex unit B.
13. Close the top cover and the front cover.
Important
• When closing the front cover, be careful not to get your
fingers caught between (the left, right, top, or bottom
edge of) the cover and the printer.
14. Plug in the power cord and switch the power on by pressing the power switch to the
<|> position.
The installation is now complete.
Note
• You can check whether the duplex unit has been installed correctly by printing out the [Printer Settings]
list. Refer to "Printing the Reports/Lists" in the 'User Guide' on how to print the [Printer Settings] list.
• After installing the duplex unit, change the accessory configuration on your print driver. For more
information, refer to the online help provided for the print driver.
4