Important Safety Information; Electrical Requirements; Important Warning - Danby Designer DCF051A2WDD Guía De Utilización Y Cuidado Para El Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Please ensure that component parts shall be replaced with like components and that
servicing shall be done by factory authorized service personnel, so as to minimize the
risk of possible ignition due to incorrect parts or improper service.
This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.

ELECTRICAL REQUIREMENTS

Due to possible variations in line voltage caused by overloading of circuits, it is advisable to install a
dedicated circuit from the meter panel. This will help eliminate current fl uctuation which might cause
motor trouble. The serial rating plate indicates the voltage and frequency the unit is designed for.

IMPORTANT WARNING

An empty refrigerator or freezer is a very dangerous attraction to children. Remove either
the gasket or door from unused appliances, or take some other action that will guarantee it
harmless.
DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
• Take off doors.
• Leave the shelves in place so that children may not easily climb in.
WARNING! EXPLOSION HAZARD!
Risk of fi re or explosion due to puncturing of refrigerant tubing. Do not use sharp objects
to aid in defrost. Please handle with care. Keep fl ammable materials and vapors such as
gasoline away from the refrigerator. Use nonfl ammable cleaner.
Disposal of this unit should be in accordance with federal and local regulations.
This appliance is not intended for use by persons (including children) whose physical, sensory
or mental capabilities may be different or reduced, or who lack experience or knowledge, unless
such persons receive supervision or training to operate the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use extension cords or ungrounded (two prongs) adapters.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar
qualifi ed person in order to avoid hazard.
WARNING Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear
of obstruction.
WARNING Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
WARNING Do not damage the refrigerant circuit.
WARNING Do not use electrical appliances inside the food storage compartments of the appli-
ance, unless they are of the type recommended by the manufacturer.
This unit is not designed for outside installation, including installation anywhere that is not tem-
perature controlled (including garages, porches, carports, etc.).
Before connecting the appliance to an electrical power supply, let it stand 6 hours. This will reduce
the possibility of malfunctions in the cooling system due to transport handling.
The refrigerator system of the appliance is fi lled with refrigerant and insulating substances which
should be separately treated and processed. Call your nearest authorized service agent or spe-
cialized servicing centre. If you are unable to locate one, contact your local authorities or your
distributor. Be careful not to damage any tubes that may be on the rear wall of the appliance.
DON'T WAIT! DO IT NOW!
SAVE THESE INSTRUCTIONS!
2

Publicidad

Tabla de contenido
loading

Tabla de contenido