Use Of The Machine For Purposes For Which It Is Intended; Incorrect Use; Ec Declaration Of Conformity; Commissioning - BEHAbelt LG 4A Manual De Instrucciones

1.2 USE OF THE MACHINE FOR PURPOSES FOR WHICH IT
IS INTENDED
The charging unit may be used exclusively to charge BEHAbelt battery packs.

1.3 INCORRECT USE

All uses other than those described under section 1.2 are regarded as in-
correct use and are therefore not admissible.

1.4 EC DECLARATION OF CONFORMITY

BEHA Innovation GmbH, hereby declares under sole responsibility that the pro-
duct with the serial or batch no. (see reverse side) complies with the require-
ments under the Directive EN 60335, 2006/95/EG, 2014/30/EU.
Document Agent: Markus Beha
Glottertal, 10/16
Markus Beha, Managing Director

2 COMMISSIONING

2.1 PRIOR TO TAKING THE MACHINE INTO SERVICE

Before connecting tool to a power source, be sure the voltage supplied
is the same as specified on the name plate of the tool. The power supply
should not vary more than 10% above or below the voltage indicated on
the nameplate.
Charging Units:
FBWRS02LG4A2: 240V
FBWRS02LG4A1: 120V
• Observe national regulations.
16