Publicidad
Idiomas disponibles
Idiomas disponibles
Note 1: LED flicker 3 times to prompt the current DMX address, LED flash color corresponding static color
mode in turn , 0—9numeric keys corresponding color (please see sheet 4)
Note 2: every operation time is 6s, after setting DMX address , LEDED flicker 3 times, to prompt the preset
DMX address,same as note 1.
2.
LED Working Mode Introductions
2.1 Auto Running
Press the "AR", enter auto run mode menu, the fixture will auto running 6 built-in programs Pr02~Pr07, the user can
set their running speed and strobe speed in built-in program mode, the preset effect will operate in turn in auto run
mode.
2.2 Built-in Programs
Press the "SPR", enter built-in programs mode menu.
Press the "2" or "7", select built-in programs.
Sheet 2 The built-in programs description
Built-in programs
Description
Built-in program 1
Select static color
Built-in program 2
Seven color gradient
Built-in program 3
Three color gradient
Built-in program 4
Fantasy
Built-in program 5
Seven color hopping
Built-in program 6
Three color hopping
Built-in program 7
Various hopping
2.3 Static Color
IR remote operation please see sheet 1
Sheet 3 LED static color description
LED display
color
Button 0
White
Button 1
Red
Button 2
Orange
Button 3
Light yellow
Button 4
green
Button 5
cyan
Button 6
Blue
Button 7
Purple
Button 8
Pink
Button 9
Yellow
2.4. Dimming Mode
IR remote operation, please see sheet 1.
2.5 Slave Mode
After enter slave mode, if it receive the host signal, will close IR signal, until there is no host signal or switch to other
modes, will open to receive IR signal.
2.6 DMX Mode
1) This product has automatic recognition DMX signal, so long as it received DMX valid date, no matter any
previous mode will be automatically entered into DMX mode, at this time, any operation to LED display is invalid,
DMX signal disappear, restore the previous mode.
2) DMX Working Mode
Sheet 4 3 channels DMX mode function
Channels
Numeric
1
0-255
2
0-255
3
0-255
After enter DMX mode, if receive the DMX signal, will close to receive the IR signal, until DMX
signal disappear or switch to other mode (except slave mode), open to receive IR signal.
3.
Restore Factory Settings
Operation by IR remote, please see sheet 1.
Functions
R (0-100%)
G (0-100%)
B (0-100%)
PAG. 3
Publicidad
