RiverRidge 06-084 Instrucciones Para El Armado página 5

STEP 1
1. Attach magnet plate (F) to left door (5) by inserting 1 wood screw (J) through hole on magnet plate
(F) then tighten to left door (5).
2. Attach knob (G) to left door (5) by inserting 1 machine screw (H) through hole on left door (5)
then tighten to left door (5).
3. Repeat above steps to assemble magnet plate (F) and knob (G) to right door (4).
4. Screw 4 cam bolts (A) into pre-threaded holes on top board (1).
5. Insert 2 wood dowels (C) into wood dowel holes on top board (1).
6. Attach magnet (E) to top board (1) by inserting 2 screws (K) through holes on magnet (E) then
tighten to top board (1).
STEP 2
1. Attach 2 metal hinges (D) to right side panel (3) by inserting 4 wood screws (J) through holes
on metal hinges (D) then tighten to right side panel (3).
2. Screw 3 cam bolts (A) into pre-threaded holes on right side panel (3).
3. Insert 7 wood dowels (C) into wood dowel holes on right side panel (3).
4. Repeat above steps for left side panel (2).