Allen + Roth WL134MBK Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
8.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
Secure fixture (A) to mounting strap (B) with
decorative nut (C) that was previously removed
(Step 3, Page 6).
NOTE: Before tightening decorative nut (C)
completely, use level (not included) to check
fixture (A) -- adjust if necessary.
9.
Install two 60-watt max. candelabra-base
incandescent bulbs (not included) or CFL/LED
equivalents.
CAUTION: When replacing bulb(s), please
allow bulb(s) and fixture to cool down before
touching.
Close fixture door, making sure latch is
completely inserted. Restore power and test
fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
10. After completing installation, caulk fixture (A)
mounting surface with silicone weather
sealant (not included).
WARNING:
mounting surface with silicone weather
sealant may result in water damage in outlet
box, which may cause electrical malfunction
or electrical shock.
Failure to caulk fixture
8
C
9
A
Latch
10
A
8
A
B
Bulb