STEP 5
5
With the (-) ball contact touching the skin and the (+)
ball remaining on the patch, slowly and gently move
back and forth along the patch for 60 seconds.
increase the power until a steady tingling is felt.
© The Dezac Group 2011
STEP 6
6
© The Dezac Group 2011
repeat the process across the other patch.
continue treatment by alternating between patches
for 10–30 minutes (5–15 minutes on each patch).
© The Dezac Group 2011
STEP 7
7
the patches may remain on the face for up to 1 hour
60
to continue gently infusing.
after removing patches, you can massage any residue
into your skin.
STEP 8
8
after use, switch the unit off. Press and hold the
programme/on/off button for 2 seconds.
Note: if unit is left on, it will automatically switch off
after 10 minutes.
PatcHES inForMation
•
The majority of the infusion happens in the first 5–15 minutes on
each treatment area, but the patches may remain on the face for
up to 1 hour.
•
Retinol easily breaks down, therefore please store your patches
in a cool dry place away from sunlight. you may even prefer to
store them in the refrigerator to have a cooling gel patch for
treatment.
•
Retinol can make your skin more sensitive to the sun. After use,
we recommend using a high factor sunscreen.
•
Ensure patches are well adhered to the face before treatment so
they don't peel off.
•
Use a gentle motion when moving the ball contacts over the
patch and the skin.
•
The patches are designed for single use only.
•
To purchase more conductive gel or collagen & retinol
patches, use the accessory form or call our careline on:
+44 (0) 1242 702345.
11