Hummer H-240AURA Manual De Instrucciones página 5

1) 6mm radiator screws x8
2) 29.5mm fan screws x8
3) Intel LGA 2011 screws x4
4) Thermal compound x1
5) Intel bracket x2
Radiator & fans installation
2
Intel installation
LGA 2011
A.1) Attach the LGA 2011 (3) screws on
the motherboard.
LGA 775 / 115X / 1366
8
A.1) Use the back plate (8) with the
correct side for Intel mounting. This
side will face the motherboard.
6) Knurled Threaded nuts x4
7) T-nuts x 4
8) Back plate x1
9) 28.5mm back plate screws x4
10) Brackets screws x4
A) Attach the fans on the radiator using the 29.5mm fan screws (2).
Make sure that the fan's airflow will be moving towards the exterior of the
1
PC chassis.
B) Attach the radiator on the PC chassis using the 6mm radiator screws (1).
Note:
Optionally, you can also install the radiator at the PC chassis' front and rear interior.
* The H-120AURA model only includes 1x 12 cm Hummer fan.
LGA 2011 / 775 / 115X / 1366
LGA 2011
3
A.2) Apply thermal compound (4) on
the CPU.
LGA 775 / 115X / 1366
A.2) Position and insert the screws (9)
on the back plate according with the
CPU socket.
11) Insulative rings x4
12) AMD bracket x2
13) Fan spliter cable x1
14) 12cm Hummer fan x2*
15) Internal RGB controller x1
16) RGB hub adapter x1
4
LGA 775 / 115X / 1366
1366
115X
775
9
A.3) Pass the back plate screws through
the motherboard, apply the insulative
rings first (11) and then the knurled
nuts (6). Apply thermal compound (4)
on the CPU.
4
6
11