Publicidad
Idiomas disponibles
Idiomas disponibles
Features
1) Detachable USB-A to micro-USB connector that works without being removed from unit, so you
don't have to lug around any extra cords.
2) Secondary high-output (2.4A) USB port to charge tablets or other high-energy devices, or to charge
your smartphone more quickly.
3) Four LED indicators to let you know the remaining battery level (each LED indicates 25%).
Getting Started
1) Charge your unit by plugging one end of the (included) standard USB-A connector into a wall-
adapter or computer's USB jack and the other (micro-USB side) into the PEB10200.
2) While charging, you should see 0-3 solid blue LEDs and one blinking LED. The unit is already charged
25% for each solid LED and is currently charging past that amount. For example, if you see three
solid blue LEDs and a fourth blinking LED, then the unit already has a 75% charge and is now
charging from 75% up to 100%. NOTE: Lithium-ion battery life as detected by the power-banks built-
in electronics is approximate and does not always correspond to real-world timing for battery
depletion. As such, you may want to keep your power-bank charged fully for unexpected use.
3) Once fully charged all four blue LEDs will light steadily.
4) To power on unit, press the round power button . You should see solid blue LEDs indicating
approximately how much power is left. Your Power Bank will shut off by itself if not hooked up to a
device that needs charging within 10-12 seconds.
5) To hook up a device for charging, you may un-hook the built-in removable cord from the unit and
plug into the device. Alternatively, you can supply your own USB-A to micro-USB, mini-USB, Apple
30-pin or Apple Lightning cords to your devices. Note that the built-in cords work when the USB-A
connector is left plugged in, meaning you can charge two devices at once. To charge a device using
the more powerful 2.4Amp output, either remove the internal cord and plug into this port or use
another (user-supplied) cord.
Technical Specifications
Input: 5V/2A
Output: 5V/1.1A, 5V/2.4A
Battery: built-in lithium-ion polymer (10200mAh)
PEB10200
Charging time: 5-10 hours (2-1A)
Dimensions: 66 x 133 x17.5 mm.
Weight: 225 g, or 7.9oz.
Page 3
Publicidad
